Training Series Introduction
This video is a quick intro to the Mavic 2 Enterprise Series, Matrice 300 RTK, and DJI Pilot App training series.
- 0:22 Introduction to instructor, DJI Solutions Engineer Grant Hosticka
- 1:30 Overview of the training material that will be covered
- 2:41 Suggested prerequisites
Back to training video list
Intro to Matrice 300RTK and H20 Series
This video offers a high level overview of the features and capabilities of the Matrice 300 RTK and H20 Series. It also compares this against the features and capabilities of the Matrice 210 RTK V2.
- 1:00 Aircraft Design
- 2:14 Flight Time
- 3:35 Battery Station
- 5:03 Transmission System, Smart Controller Enterprise
- 6:48 Max Takeoff Weight, Payloads
- 7:26 Intro to Zenmuse H20 Series
- 9:36 Safety and Reliability (Obstacle Sensing, Redundancy, IP Rating)
- 14:11 Advanced Intelligence (Flight Display)
- 16:30 Advanced Dual Control
- 18:32 Smart Track, PinPoint
- 21:26 Smart Inspection (Waypoint 2.0, Live Mission Recording, AI-Spot Check)
- 24:17 High-Res Grid
- 25:04 SDK
- 25:28 Summary of Specs and Accessories
- 26:12 Applications
- 29:22 Enterprise Shield, DJI Maintenance Service
Back to training video list
Resources and Key Setup Notes for the Matrice 300RTK & Zenmuse H20 Series
This video will share some helpful resources and tips for set up of the Matrice 300 RTK & Zenmuse H20 Series.
- 0:21 Manuals Location (Matrice 300 Manuals | H20 Series Manuals)
- 0:55 User Manual
- 1:32 Maintenance Manual
- 1:50 Three-Propeller Emergency Landing White Paper
- 2:57 Battery Safety Guidelines
- 3:12 Known Issues
- 3:34 Release Notes
- 4:22 DJI Enterprise Insights Blog
- 4:50 DJI Tutorials for Matrice 300RTK & H20 Series
- 5:19 This Training Series
- 5:56 Key Setup Tips for the Matrice 300RTK
Back to training video list
DJI Pilot: Additional Settings with the Matrice 300RTK
This video builds on previous videos on DJI Pilot settings videos by talking about additional settings you will see with the Matrice 300RTK in comparison to the Mavic 2 Enterprise.
Recorded December 2020 with DJI Pilot V1.9.0R
- 0:35 Health Management System
- 3:56 Manual Flight Settings
- 4:04 Home Point Settings for Controller B
- 5:00 COG Calibration
- 5:29 Obstacle Sensing Settings
- 7:05 Remote Controller Settings
- 8:55 Gimbal Settings
- 10:24 RTK
- 12:12 Common Settings
- 12:54 Checklist
Back to training video list
DJI Pilot: Manual Flight Display with the Matrice 300RTK & Zenmuse H20 Series
This video builds on previous information covered in the video called "DJI Pilot: Manual Flight Display with the Mavic 2 Enterprise Series (Zoom & Dual)" which covers items such as the map display and self-unlocking.
Recorded November 2020 with DJI Pilot V1.9.0
- 0:40 Manual Flight Display
- 2:13 Whats Different with the M300RTK vs. M2E Display and why
- 3:07 Switching Video Display
- 4:17 Understanding the FPV Camera and Display
- 6:56 Horizontal Flight Display & Obstacle Display
- 10:12 H20T/H20 Display
- 11:28 Icons (laser range finder, pin, home point)
Back to training video list
DJI Pilot: Manual Flight Functions with the Matrice 300RTK & Zenmuse H20 Series
This video builds on concepts from a previous video called "DJI Pilot: Manual Flight Functions with the Mavic 2 Enterprise Series (Dual & Zoom)". For example the isotherms function that is also available with the H20T is covered in greater depth.
Recorded November 2020 with DJI Pilot V1.9.0
- 0:29 Dual Remote Controllers & Gimbal Control
- 2:28 H20 Series Overall Settings and Functions
- 3:02 Menu Buttons/Functions (Recenter, Beacon, Dual Gimbal Sync, Laser Range Finder)
- 9:09 H20 Camera Options (Wide) & Save Photos/Video Options, folders, timestamps
- 13:35 H20 Camera Options (Zoom)
- 15:54 H20 Camera Options (IR)
Back to training video list
Understanding Smart Track and PinPoint with the Matrice 300RTK and Zenmuse H20 Series
This video covers how to use the smart track and PinPoint functions along with the benefits they provide on the Matrice 300RTK and H20 Series.
Recorded November 2020
- 0:53 PinPoint
- 3:42 SmartTrack
- 9:14 SmartTrack for Inspections
Back to training video list
Smart Inspection (Waypoint 2.0, Live Mission Recording, AI Spot-Check), Matrice 300RTK & H20 Series
This video covers the smart inspection features of the Matrice 300RTK paired with the H20 Series. AI Spot Check requires the H20 Series.
Recorded November 2020
- 1:11 Waypoint 2.0
- 1:55 Live Mission Recording
- 5:25 AI Spot-Check
Back to training video list
High-Res Grid: How it Works & Why it Helps Inspection Workflows, Matrice 300RTK & Zenmuse H20 Series
This video covers the high-res grid feature in depth and shows how it can assist an inspection and subsequent review of photos.
Recorded November 2020
- 1:52 High-Res Grid specific content starts
- 4:42 High-Res Grid Review
Extra Tips:
- Make sure to open html file from inside the folder because it utilizes all the assets/photos.
- Don't change the name of the photos in the folder. Copy and paste them outside of the folder.
Back to training video list
Circular Scanning Millimeter Wave Radar for Matrice 300 RTK (CSM)
This video contains an overview of the Circular Scanning Millimeter Wave Radar for the Matrice 300 RTK (CSM).
Recorded January 2021
- 0:05 Product & Technology Intro
- 1:17 Pilot App Interface with Radar
- 3:25 Video Examples With & Without Radar
- 5:48 Detection Specifications, Additional Specs & Considerations
Back to training video list
>>Mavic 2 Enterprise Series and DJI Pilot Training<<
