Product Trainings

To better help you get the most out of your Mavic 2 Enterprise series drone, the Solutions Engineering team has created a series of videos aimed at providing you in depth training on the various features and best practices.

Training videos available:

• Training Series Introduction: M2E Series, M300 RTK, H20T, Pilot
• Introduction to the Mavic 2 Enterprise Series (Dual and Zoom)
• Introduction to the DJI Pilot App
• DJI Pilot: Main Menu
• DJI Pilot: Settings with the Mavic 2 Enterprise - Part 1
• DJI Pilot: Settings with the Mavic 2 Enterprise - Part 2
• DJI Pilot: Manual Flight Display with the Mavic 2 Enterprise Series (Zoom & Dual)
• DJI Pilot: Manual Flight Functions with the Mavic 2 Enterprise Series (Dual & Zoom)
• DJI Pilot: Mapping Mission Basics with the Mavic 2 Enterprise Series
• DJI Pilot: Waypoint Mission Basics with the Mavic 2 Enterprise Series
• DJI Pilot: Oblique Mapping Mission Basics with the Mavic 2 Enterprise Series

Training Series Introduction

This video is a quick intro to the Mavic 2 Enterprise Series, Matrice 300 RTK, and DJI Pilot App training series.

• 0:22 Introduction to instructor, DJI Solutions Engineer Grant Hosticka
• 1:30 Overview of the training material that will be covered
• 2:41 Suggested prerequisites

Back to training video list

Introduction to the Mavic 2 Enterprise Series
Dual and Zoom

This video offers a high level overview of the Mavic 2 Enterprise series, including features, models, and hardware. Subsequent videos will go more in-depth on how to use these various features.

• 0:20 Key Features
• 1:30 Mavic 2 Series Comparison (Consumer vs. Enterprise Series)
• 2:30 Features
• 10:14 Mavic 2 Enterprise Dual Features
• 22:05 Mavic 2 Enterprise Dual vs Zenmuse XT2 Comparison
• 23:40 Industry Usage Highlights
• 24:42 Modular Accessories
• 25:48 In the Box & Recommended Accessories
• 27:26 Supported Apps, Remote Controllers, Software Support
• 30:22 FAQ’s

Back to training video list

Introduction to the DJI Pilot App

This video is an introduction to the DJI Pilot app: what it is, which devices one can use, various app versions, how to update and more helpful tips.

• 0:20 What is the DJI Pilot App
• 1:37 Who is the DJI Pilot App For
• 2:17 Which Devices will run the DJI Pilot App
• 3:49 Various App Versions for Different DJI Drones (Download Center)
• 5:26 How to Update In App (Option 1) - Can also go into settings and check for updates
• 6:05 How to Update, App Store/Play Store for 3rd Party Devices (Option 2)
• 6:50 How to Update, download specific .apk and install, troubleshooting (Option 3)

Back to training video list

DJI Pilot: Main Menu

This video goes through all of the features within the DJI Pilot App main menu, including offline maps, GEO Zone unlocking, and flight records.

Recorded November 2020 with DJI Pilot V1.9.0

• 0:13 Main Menu/Startup Screen
• 1:03 Understanding Connection Status
• 3:22 Firmware Version Check
• 4:40 App Menu: Offline Maps
• 5:16 App Menu: Flight Records
• 8:07 App Menu: GEO Zone Unlocking/Geofencing Unlocks
• 10:14 Enterprise Shield, Local Data Mode
• 11:05 Settings: Security Code, Check Updates, Sign Out:
• 12:34 Tutorials, Gallery, Flight Hub

DJI Pilot: Settings with the Mavic 2 Enterprise
Part 1

This video is Part 1 of a two part series that goes over the various detailed settings within DJI Pilot and how they influence operations. The Mavic 2 Enterprise is used, but this is foundational knowledge that applies for other platforms, such as the Matrice 300 RTK.

Recorded November 2020 with DJI Pilot V1.9.0

• 2:09 Flight Controller Settings (home point, sensors, flight modes, RTH)
• 15:42 Obstacle Sensing Settings (enable/disable, RTH obstacle detection, aux lighting)
• 19:21 Remote Controller Settings (control stick mode, buttons, calibration, linking)

DJI Pilot: Settings with the Mavic 2 Enterprise
Part 2

This is Part 2 of the two part series that goes over the various detailed settings within DJI Pilot and how they influence operations. The Mavic 2 Enterprise is used, but this is foundational knowledge that applies for other platforms such as the Matrice 300 RTK.

Recorded November 2020 with DJI Pilot V1.9.0

• 0:00 Image Transmission Settings (Image Channel Selection, Video Output)
• 3:37 Aircraft Battery (Cycles, Smart RTH, Battery Warnings)
• 10:07 Gimbal Settings (Pitch Extension, Pitch Speed)
• 12:01 M2E Accessory Settings
• 12:22 Common Settings (Map Switch, Units, Versions, SN)

DJI Pilot: Manual Flight Display with the Mavic 2 Enterprise Series (Zoom & Dual)

Understand what is shown when utilizing the manual flight display, both on the camera feed and map, by watching this training video.

Recorded November 2020 with DJI Pilot V1.9.0

• 0:29 Manual Flight Display
• 5:49 Map
• 10:03 Unlocking a DJI Authorization Zone/Geofencing

DJI Pilot: Manual Flight Functions with the Mavic 2 Enterprise Series (Dual & Zoom)

Understand various functions for the Mavic 2 Enterprise Dual and Zoom while using the DJI Pilot app by watching this training video.

Recorded November 2020 with DJI Pilot V1.9.0

• 0:17 Overall Manual Fight Functions
• 4:47 Mavic 2 Enterprise Zoom Interface
• 12:14 Mavic 2 Enterprise Dual Interface

DJI Pilot: Mapping Mission Basics with the Mavic 2 Enterprise Series

This video covers mapping mission basics with the Mavic 2 Enterprise using Pilot 1.9 with a Mavic 2 Enterprise Zoom as an example.

You will need the following for DJI Mission Planning: android device, DJI CrystalSky, or DJI Smart Controller. If using iOS, you can run DJI GSPro on an iPad. If using an iPhone, you would need to use a third party app.

Recorded November 2020 with DJI Pilot V1.9.0

• 2:43 DJI Pilot specific instructions

Custom Camera Parameters:

Not all of these are recommended for surveying and mapping. A 2.5 second minimum interval is recommended. 2 seconds can be used as well depending on the camera used. Be sure to set the photo size to the biggest option available (example: X4S = 3:2). The H20 Series can only be used on the Matrice 300 RTK. The X4S, X5S, and X7 cannot be used on the Matrice 300 RTK.

Back to training video list

DJI Pilot: Waypoint Mission Basics with the Mavic 2 Enterprise Series

Learn waypoint mission basics for DJI Pilot on the Mavic 2 Enterprise Series. Pilot 1.9 with Mavic 2 Enterprise Zoom used as example.

Recorded January 2021 with Pilot 1.9

• 0:14​ Understanding Waypoints, Waypoint Applications
• 3:21​ Setting up a Waypoint Mission, Set Waypoints, Map Interface
• 6:53​ Route Settings
• 9:41​ Waypoint Settings
• 14:53​ Live Mission Recording

Back to training video list

DJI Pilot: Oblique Mapping Mission Basics w/ Mavic 2 Enterprise Series

Learn oblique mapping mission basics for DJI Pilot on the Mavic 2 Enterprise Series. Pilot 1.9 with Mavic 2 Enterprise Zoom used as example.

Recorded January 2021 with Pilot 1.9

• 0:07​ What would an oblique mapping mission be used for?
• 1:29​ Creating Mission and How it Works
• 3:39​ Settings
• 6:05​ Executing Mission & Video Example

Back to training video list